My buddy Normable1973 needs a new clutch

[Normable1973]

I got the halfs apart but it's like the plate won't come apart. They are about 1/2 inch apart and won't come anymore. Something is holding them together. Very aggravating..

[Normable1973]

C clips?

[hydromike]

C clips?

After you split the cases and get the right-side off of the center plate, you'll have to take this C-clip off in order to get the center plate out.





If all of the bolts that hold the two case halves together have been removed, there's nothing but friction (and maybe some silicone if it's been applied) holding the halves together. Honest.

[JoeMeg]

My guess is that the right side band anchor pin is hanging up in the hole on the center plate. Ya may just have to to try and "wiggle" the plate a bit

[Dan67]

wonder if there is more then a clip causing problems

[Normable1973]

Ok I know about those c clips. It's like the plate is stuck really good with silicone. I wish I knew how to post pics

[Normable1973]

I'm gonna soak the whole thing in gas tom morn.

[amphibious drew]

I'm gonna soak the whole thing in gas tom morn.

Just don't light a match and watch it burn!

[Normable1973]

Sometimes that's what I wanna do!!!

[Normable1973]

Soon. I got the t20 apart, I made 4 jacking bolts and pushed the plate out (way too much permatext) the end of the plate that is in middle of trans is messed up I think I put washer on wrong end. Also I think I need new bands and my drums turned. You can see all pics in my album(90s max 2) What would you do? Thanx. Norm...