New members, introduce yourself here

[JoeMeg]

[ATTACH=CONFIG]9252[/ATTACH]
Waaaaaait for it.

Joe.

[Czechsix]

Greg, you should purchase a t20 if it has a atv 7000 tranny and convert it to the t20. Much less maintenance and more reliable. I did it and I will try try to post pictures of how its done. You will have to purchase additional parts from richard's relics, though.

Yah, I'd love to see how you did that. Other than the T20, couldn't the additional parts be fabbed?

[gregthebeast]

I already have those parts. They are just two 1 1/8" #50 chain sprockett and four #40 1 1/8" chain sprockett to convert it. I do agree that his prices are really high and he says they are not. However I've never purchased anything from him. so I don't know about his customer service.

[phil cross]

Hey everyone Dont have a whole machine yet. Just missed out on a 70's Amphicat at the scrap yard. I did use this site to do my research but hesitated and lost. I did however run across a emty hull for a Jiger in the process. I live in Ontario canada and found out a bit about the history of the Jigger and that they were built verry close to where I grew up. I have attached a photo of the hull (never been drilled) and hoe someone can help me identify it. I am also hoing to find a cheap project machine(s) that I can work on over the winter.

[Packer]

Hi this is Jensen from Denmark,
Just traded my old HD WLC for a Max IV and loving it, I mainly use it for hunting trips in Sweden. I already own a Terra Tiger with an B&S 18hp installed. Looking for tip or tricks on how to install a reverse in the Tiger. (restoring it for my kid)

Have fun and stay safe

Per Jensen

[amphibious drew]

Welcome Phil and Packer,

Phil,

keep an eye out and you will find a nice project. There are a lot of members up there in canada that can probably help you out, but a trip to the states may be your best bet to get a t-20 based machine like an Attex or Max. There are great project machines due to the bullet proof tranny and simplistic designs.

Packer,

Buggyman put a reverse on a terra tiger using a starter so he could back it out of the garage. Do a search on the site for terra tiger reverse and just about every thread will have a video of him backing it up. I doubt it will be enough power to back out of the sloppy stuff, but it will get you out of the garage just fine.

[brushcutter]

Greg, Phil, and Packer, welcome to 6x6 world, always good to see our membership grow.

[phil cross]

thanksdrew I will keep looking and expand my search into the States. I have added photos og my Jiger hull. I was hoping to make a trailer out of it for the kids and was thinking of droping a jet drive into it to push my other machine (when I find it)

[jpswift1]

thanksdrew I will keep looking and expand my search into the States. I have added photos og my Jiger hull. I was hoping to make a trailer out of it for the kids and was thinking of droping a jet drive into it to push my other machine (when I find it)

Before you make the Jiger into a trailer, you might want to preserve it for it's historical value and sell it to a collector. Contact the gentleman who runs the Jiger site and he might be able to work something out with you.

Here's his website:

Home

[Lil Beast]

Well, guess I should say hi My husband is on here, so since I now have an Argo as well (a 6x6 oldy with a new 06 bigfoot bottom) I figured I should join as well and I cannot wait to show you all my argo when I get pictures- it sure is a Lil Beast!

[Mike]

Hi Lil Beast, welcome to the site. I look forward to seeing the photos of your Argo.

[JACK ATTACK]

Hello gang... my name is JACK. I use to own a Terra Jet 453te and recently sold it. Lately I've been looking at used amphibious atvs and will be back on the trail soon in either a 6x6 or an 8x8. Great videos on trail riding on this website!!! JACK ATTACK

[trebmaster]

hay Jack welcome to the site. good luck finding what you want.. if you post your area mayby someoneon here can keep an eye out for you.

[df145]

I have an Argo 1971 6x6 that needs a lot of work. I live in Canada Ontario and will need the assistance of many if they are able I'm glad to be here. I also ha a honda 420 atv. My name is also Mike.

[Mike]

Hi Mike, welcome to the site!